sedimentation filter cartridge dust collector

Usage Introduction

sedimentation filter cartridge dust collectorUnder normal operation, the dust-containing air enters the HR-type dust collector through the top inlet, and then passes through the filter element after being dispersed downward by the deflector. The dust is blocked on the outer surface of the filter element, and the filtered clean air enters the clean air through the center of the filter element. Chamber, discharged through the outlet pipe.

industrial pulse bag filter uses a filtering method to remove tiny particles that are difficult to remove from the flue gas by other methods, and has a very high dust removal efficiency. There are no moving parts inside the bag dust collector, and the filter bag can be checked or replaced from the top of the dust collector. Its design features ensure the versatility and simplicity of operation of the dust collector.

Specific Features

sedimentation cartridge filter elements can be cleaned automatically and intermittently in such a way that only one set (2) of filter elements are cleaned offline at any given time.

During the dust removal process of the filter element, the pulse controller is connected to the power supply of an electromagnetic pulse valve to make the corresponding thin film valve spray pulse high-pressure air, which passes through the filter element from the inside to the outside to remove the dust attached to the outer surface of the filter element, and the dust particles fall into the dust hopper and then enter the dust collection bucket.

The compressed air pressure of the sedimentation cartridge dust collector is adjusted to 6kg/c ㎡, and the compressed air pressure of 6kg/c ㎡-7kg/c ㎡ is a standard set value that can meet the requirements of ash removal function. The smaller the set value of the compressed air pressure, the smaller the air consumption of the pulse valve. The pulse blowing controller can generally be adjusted to clean a column of filter elements every two minutes, that is, a pulse valve is connected every two minutes. To increase the cleaning energy, the pressure of compressed air can be increased, but it should not exceed 7kg/c ㎡.